Mettler Intrac 777M/070/4404/D00/EP/A00 Sensor

Description

This is a
Mettler Intrac 777M/070/4404/D00/EP/A00 Sensor
What you will get:
Mettler Intrac 777M/070/4404/D00/EP/A00 Sensor
Cable that hooks to the end of the 777M/070/4404/D00/EP/A00
Printout of the specification sheet from the Mettler Site
This is my item 58.5.  This was hooked up to a Yokogawa PH / ORP Transmitter PH202S-U (suffix -E /U).  I separated them since this can be used with other transmitters.  If you buy both, I won't disconnect the cable from the Yokogawa PH / ORP Transmitter PH202S-U.  This may be new, and never was put into production.
More Information:   Mettler
Intrac 7
7
7
M
/
070
/
4404
/
D00
/
EP
/
A
0
0
Intrac 7
7 = Single Flushing Chamber
7 = pH electrodes with gel-/polymer electrolyte and sensors with Pg 13.5 thread
M = Manual Operation
070 = Insertion length (H)
H=70mm
4404 = Material DIN 1.4404/AISI 316L
D00 = Process Connections  Ingold DN25 weld-in socket
EP = O-Ring Material  EPDM-FDA
A = Body Material PP conductive
0 = Flushing Connections Without
0 = Specials: None
Short description InTrac retractable housings from METTLER TOLEDO with TRI-LOCK™ safety system enable the installation of electrodes/sensors in the chemical, pharmaceutical and food & beverage industry.
Sensors can be calibrated and cleaned without interrupting the process which dramatically increases sensor life and reduces intensive maintenance.
Features
TRI-LOCK™ safety system – Cleaning and calibration without interrupting the process
Various immersion depths to suit reactors, tanks or pipes sizes
Large selection of materials of construction according to demanding application requirements
Flexible process adaptations for the chemical, pharmaceutical and food & beverage industry
Sterile double rinsing chamber (InTrac79Xe)
Easy installation
Please use the shipping calculator to determine shipping.
Check out my
other items
!
If you receive your item and it is not to your 100 Percent Satisfaction, please contact us before leaving feedback. I strive to make sure every transaction is a positive one!
IF you have a problem with my item, I would like you to use the "Contact Seller" link in the listing, or call me. Please don't open a case. Cases count against me even if they are resolved. I stand behind my items and will work out any problems that you may have with an item. So please contact me if you have a problem with an item I have sold you and don't use the eBay Case as a means of communication.
International Buyers, Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as "gifts". US and International government regulations prohibit such behavior.