72162168 Tractor Air Cond. Compressor Sanden Style With Clutch

Description

Air Conditioner, Compressor, Sanden style, with Clutch, 5-1/4" Pulley, 2A Pulley Grooves
Models:
Fits
Allis Chalmers:
9130, 9150, 9170, 9190, 9630 s/n -921000, 9650 s/n -941000, 9670 s/n -961000, 9690 s/n -981000
Fits
Steiger:
BC SERIES I/II Late Series II w/o Service Ports, CA-INDUSTRIAL SERIES Late Style O-ring Style w/o Service Ports)
Fits
White:
100, 120, 125 WORKHORSE, 140, 145 WORKHORSE, 170 WORKHORSE, 195 WORKHORSE, 2-105 s/n 299004-, 2-110, 2-135 s/n 400418-, 2-155
Replaces:
72162168, A-72162168, 351224T9, 351224T9-R, 351224T91, 500-1434, 500-496, 500-676, 504-1427, 504-1434, 504-1443, 72162168-R, 9114
The following steps must be performed prior to compressor installation for warranty to be considered on all A/C compressors. Failure to do so will void all warranty.
Please read the following before installing:
1.    Was the system (condenser, evaporator, lines, etc.) flushed with an approved liquid?
2.    Was a new receiver-drier or accumulator put on when the compressor was replaced?
3.    Were the expansion valves or office tubes inspected – cleaned – replaced?
4.    Were lines inspected / replaced?
5.    Was the condenser and evaporator checked/cleaned of debris to be sure there is a free flow of air through them?
6.    Was the system properly vacuumed down?
7.    Check and use the OEM recommended amounts for the type of oil needed.
8.    After filling system with Freon, was the compressor hand turned to avoid hydro lock?
9.    Was the voltage checked at the compressor for required the voltage to avoid clutch failure?
10.    Was the system run and checked for leaks?
11.    Was the Freon checked for the proper level to prevent under/ overcharging?
12.
For any reason a warranty claim should arise the proper documentation/shop work order of the above steps should be available and accompany the compressor for warranty.